If size matters then the large frame three-point linkage is for you. Designed as an alternative to a trailed sprayer with tanks sizes ranging from 1500L through to 2000L and three different boom styles from 15m to 28m. 

The versatility of the large frame 3PL has meant it has found homes in cereal, cotton and horticulture areas right across Australia. All models are fully configurable to suit your individual needs.

  • The frame utilizes thick walled Australian made steel to create an extremely strong structure, essential when fitting wider booms. The key to its strength is the combination of square and rectangle hollow sections (SHS & RHS) and precision laser cut plates placed in strategic locations. The frame is also very narrow which helps to keep the boom as close as possible to the tractor wheels for better weight distribution. The tractor pick up points are designed to suit a category three linkage equipment. Retractable support legs provide stability when the sprayer is disconnected from the tractor.
  • Australian made rotationally moulded thick wall UV stable tank with an extra deep centre sump design. Smooth internal wall aids rinsing and decontamination. The tanks are available in 1500, 1800 and 2000L capacities.
  • 100L saddle style rinse tank mounted to the top of the main product tank. The rinse tank can be used to flush out the pump and boom lines at the end of the spray job whilst still in the field.
  • Tank level sight tubes (main and rinse tank) allows the operator to visually check volumes from inside the tractor.
  • High volume high pressure (170 l/min 20 bar) three piston diaphragm pump with 540 rpm PTO shaft provides smooth consistent water flow to the boom. If more flow is required then this pump can be upgraded to a 260 l/min unit.
  • A pump suction filter with three way ball valve allows the operator to switch between drawing from the main tank and the rinse tank. The off position also allows the strainer to be removed and cleaned even when the sprayer tank is full.
  • Twin pressure line filters greatly reduce the chances of nozzle blockages. The first filter is a coarse mesh while the second is finer.
  • Venturi agitator fitted to the tank greatly improves the consistency of the tank mix over the course of the spray job.
  • Chemical venturi probe is used to draw neat chemicals into the main tank. This type of chemical induction means that at no stage does neat chemical come into contact with the pump, which could cause corrosion problems.
  • Plumbed from the external filling point the internal tank rinse nozzle with rotating head quickly and easily decontaminates the inside of the tank.
  • Top mounted bottom fill allows the water to be pumped in through the top of the tank and down to the bottom. This method reducing foaming and also reduces the risk of contaminating the water source if the transfer pump stops unexpectedly.
  • All spray hoses are constructed using a Nitrile liner. This liner helps resist the effects of the most aggressive of chemicals from damaging the hose.
  • Electric section and pressure regulation control is fitted for easy in cab adjustment. While an external control station is used to operate auxiliary functions like chemical transfer and agitating. An adjustable pressure regulator valve is fitted to set the maximum system pressure.
  • Choice of three different booms.