Hustler Combi Wagon RX178

Get ahead of the herd
With more than six years extensive product development and
testing, working on large-scale farms in NZ and around the world,
the new Combi RX range is ready for whatever you throw its way.
 

Key features


CHAINLESS REAR FLOOR
Twin speed rear pusher blade powered by hydraulic cylinders and greaseless slides provides longevity with low maintenance.

FEED CONTROL
Our new Feed control in-cab joystick gives fingertip control over the entire feeder, letting you control the feed row of any feed type and density.

TOUGHEST ROLLER CHAINS
With the toughest 12,000lb roller chains and the bis-alloy sprockets, the new RX range is built to handle the heaviest loads with ease.

HD PUCKBOARD FLOORS
Our unique HD Puckboard floors are slippery, durable and extremely tough. 15mm thick rear floor and 12mm thick cross floor for longevity.

VISIBILITY
When it comes to visibility no other wagon beats an RX. See right through to the rear of the machine and into the cross floor with no obstructions blocking your view.

STRONG RHS FEEDBAR
We’ve gone to a larger RHS feed bar, giving maximum torsional strength with a lower profile for the best of both worlds.

MASSIVE AXLE DESIGN
Toughest axle design with massive 2,200cm2 of pivot surface area and 100mm diameter pivot pins means you’ll never be repairing an axle again.

DRAWBAR
Unique drawbar provides superior manoeuvrability and weighs the load both when on the jack and attached to the tractor without the need to fold and unfold a parking stand.

CHAIN TENSIONERS
All chains have adjustable tensioners with easy access for long life and simple servicing.

LOADED WITH INNOVATION

  • Feedpad spilling retention kit standard.
  • 2 speed Chainless rear floor design, running on grease-less slides.
  • 12,000lb Chains and box section bars on elevator and cross floor.
  • Strongest 65x35 box section bolt on bars on cross floor.
  • Gearbox drive on cross floor, direct drive on elevator.
  • Covered shafts and High-Density Polyethylene floors.
  • All drives running on bearings.
  • Scale ready which weighs when on the jack and attached to the tractor.
  • Hydraulic tilting elevator.
  • Bolt on mudguards, access platforms and ladder.
  • Handles up to 5’ wide round bales.
  • Central greasing on axle and difficult to reach bearings.
  • Elevator stands up vertical for more compact transport mode.
  • Lower maintenance front and rear elevator spill retainers as standard.
  • Guarding and covers for hydraulic valves.
 

Specifications

  • Round Bales: 3-8
  • Medium Square Bales: 8-10
  • Large Square Bales (8ft long): 8-10
  • Loose Silage (Load Level): 17m3
  • Loose Silage (Heaped Load): 20.5m3
  • Maximum Load: 12,000kg
  • Overall Width: 3000mm
  • Overall Length: 7820mm
  • Overall Height/Loading Height: 2500mm
  • Standard Tyres: 500/45 x 22.5 Flotation Grip Tread
  • Axle: Tandem Walking Beam
  • Brakes: Optional 2 or 4 Wheel Braking
  • Weigh Scales: Optional Feedlink weighing and feed management system
  • Floors (Bed Floor / Cross Floor): 15mm HD Puck Board / 12mm HD Puck Board
  • Chains (Bed / X floor / Elevator): Chainless / Twin 12,000lb Roller Chains / Twin 12,000lb Roller Chains
  • Feed bars (Bed / X Floor / Elevator): Twin Hydraulic Rams / 65 x 35 RHS / 40 x 40 RHS
  • Joystick: In-cab Electric Control w/ Bales and Silage Mode
  • Hydraulics Required: 2 pair double acting
  • Elevator: 1645mm Wide Chain/Slat
  • Jack: 80mm 2 speed screw, with quick adjustment. Designed strong enough for use as quick hitch stand