PowrSpray and AirRinse
From the cab or the operator station, fast filling, benchmark spraying accuracy, power agitation, and fast and efficient rinsing is yours at the touch of a SolutionCommand button.
PowrSpray allows you to fill up to 5,000 L (1320.9 gal.) in less than 5 minutes and still have all the time and clean water you need for adding chemicals and rinsing containers. Just type the amount of liquid you would like to add into the SolutionCommand keypad and press start. The dedicated filling pump immediately starts to fill at up to 1,200 L/min (317 gpm). When you want to add chemicals, Active Pause is engaged – filling of the solution tank is paused to give you the time you need to add chemicals. Clean water is still available, as the filling pump continues to supply all you need for rinsing containers and measuring equipment. When you’re finished adding plant protection products, you can rapidly top up the tank at 1,200 L/min (317 gpm). The PowrSpray dual-circuit system lets you fill the clean water tank at any time during the filling process, eliminating a major bottleneck and getting you back into the field faster.
Active Pause
Rinsing and dilution are easy with the R4140i and R4150i Sprayers. AirRinse is enabled at the push of an in-cab button. The automatic pressurised air purge works in two steps. First, pressurised air pushes residual liquid from the eductor and rinses lines into the solution tank. Then, residual liquid is pushed from the spraylines through the nozzles (after the pump has stopped).
Residual liquid from the eductor is pushed into the solution tank
A. Air
B. Spray pump
C. Spraying nozzles
Residual liquid from the spraylines is pushed through the nozzles
A. Air
B. Spray pump
C. Spraying nozzles