H120 Loader

Find a Dealership

AU John Deere New Agriculture Attachments & Implements Front-End Loaders H120 Loader

Compatible with the 1023E and 1025R
Quik-Park stands for easy attachment and removal
512 pounds (232 kg) of lift capacity
71.2 in. (1,809 mm) of lift height

BROCHURE

Features
Specifications

Features

Expand All Collapse All

Easily remove and mount loader to and from the tractor without tools

Quik-Park™ loader mounting system

The Quik-Park mounting system on the H120 Loader is designed for easy removal and mounting to and from the tractor without tools.

Similar to that of the H130 and former 200CX Loaders, the H120’s parking stand is attached to the mast. To lower it into the park position, simply move the joystick to the raise position once the latches are opened.

To view a video of how the Quik-Park™ system works click here.

NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.

Easy removal and mounting (shown on a noncurrent 1026R)

Mount to and from the tractor without tools

End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points

Pivot pin

The unique offset head design eliminates cross-pins and cotter pins to retain the pin.

A nut ensures the pins remain in position.

A lubrication groove provides a path for lubrication.

End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Show More Show Less

Specifications

ADD MODEL

Add Model

ADD MODEL

Select Different Model

Specifications

Select up to 4 models to compare specifications

John Deere

H120

Loader

Export to Excel

1 2

Tractor

Model	1025R/1023E/1026R Tractor
Front tire	18x8.5-10 4PR R4
Rear tire	26x12.00-12 4PR R4
Front axle configuration
Wheelbase	1450 mm 57 in.
Pump capacity	3.5 gpm
Rated pressure	1987 psi

Loader

Leveling configuration
Bucket used	Pin On Materials 1250 mm 49 in.
Bucket weight	51 kg 112 lb
Lift capacity at full height	Measured at pivot (U) 319 kg 703 lbMeasured at 500 mm ahead of pivot (V) 232 kg 512 lb
Lift capacity at 59 in. (1500 mm)	Measured at pivot (W) 331 kg 729 lbMeasured at 500 mm ahead of pivot (X) 262 kg 578 lb
Boom breakout force	Measured at pivot (Y) 782 kg 1725 lbMeasured at 500 mm ahead of pivot (Z) 595 kg 1311 lb
Bucket rollback force capacity	At maximum height (VV) 763 kg 1682 lbAt 59-in. (1500-mm) lift height (XX) 789 kg 1739 lbAt ground-level line (ZZ) 867 kg 1911 lb
Dimensions	Maximum lift height (A) 1809 mm 71.2 in.At full height - bucket level(B) 1653 mm 65.1 in.At full height - bucket dumped (C) 1371 mm 54 in.
Overall length (I+F), ft (m)	2.6 m 8.6 ft
Overall height in carry position (J)
Digging depth (H)	-101 mm -4.0 in.
Reach	At maximum height (D) 571 mm 22.5 in.At ground level - bucket level (F) 1176 mm 46.3 in.
Bucket angle	Dump angle, degrees (E) -40.1 degree (angle)Rollback angle, degrees (G) 31.2 degree (angle)Dump angle, ground -114.0 degree (angle)
Cycle times	Loader raise, seconds 4.0 secondsLoader lower, seconds 2.5 secondsBucket dump, seconds 5.7 (without regen)/2.2 (with regen) secondsBucket rollback, seconds 3.5 seconds